58.9%

SemiSpare Tds Calibration Solution 250 ppm 100ml , COD Available for correcting your TDS Meter Readings

349.00

SemiSpare Tds Calibration solution , Calibrates your TDS meter to correct factory settings.

It corrects your reading taken from water purifiers , ro water purifier or any other water source.

It calibrates your TDS meter at 250PPM.

After calibration your meter is as new as it from factory.

Calibration needs to be done at 6 months interval so that the reading are accurate.

 

Description

 

  • SemiSpare Tds Calibration solution 250 PPM Calibrates your TDS Meter to correct factory settings of you TDS Meter.
  • It corrects your reading taken from water purifiers , ro water purifier or any other water source.
  • It calibrates your TDS meter at 250PPM.
  • After calibration your meter is as new as it from factory.
  • Calibration needs to be done at 6 months interval so that the reading are accurate.

Instructions:

1. Clean the Tds meter with Normal water.

2. Pour 50 ml Solution in a clean glass.

3. Now Dip the Tds meter in the solution and see the reading, If it is 250 ppm then it is ok, If not press the temp button for 4 seconds. The meter reading will flash. For Increment press and release hold key, for Decreasing the value press and release On/Off Button until it shows 250PPM.

4. Once 250 ppm is shown on the meter, continue to hold the temp button for 4 Seconds and release. Now the TDS is set.

Additional information

Weight .15 kg
Dimensions 5 × 5 × 9.5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Follow by Email
Cart
Your cart is currently empty.